Changzhou Vic-Tech Motor Technology Co., Ltd.
Focus on quality, customer first, continuous improvement, continuous struggle
Add to Cart
This motor is a high-precision, small-size hybrid stepping motor with beautiful appearance and excellent performance.
This motor is a 28mm square motor with an optical encoder on the rear. There are motor drive cables and encoder cables at the end of the motor. Commonly used plugs are marked on the drawing, and cable lengths, types and plug types are available. Can be customized according to customer requirements.
This motor currently only has a step angle of 1.8 degrees. The length of the motor can be selected between 30~51mm. Recommended lengths are 32mm, 45mm, 51mm. The torque of the motor varies according to the length. The torque is larger, the torque range of this motor is between 400~1200g.cm
The encoder adopts high-precision photoelectric encoder, and the output signal has three channels of A B signal and index signal.
There are three options for the resolution of the output signal: 500CPR, 1000CPR and 2000CPR (changes per reflection). At the same time, the signal output line increases the interference shielding function, which can ensure that the signal is not disturbed and distorted.
Because of these characteristics, motors are widely used in medical industry, high-precision instrumentation industry and other occasions that require high-precision positioning.
The motor-related parameters are summarized as follows, please refer to the selection. At the same time, since there are many customizable parameters, please refer to the following parameter selection and contact us, we will provide more professional help.
Motor parameter data sheet
| Motor type | Hybrid stepper motor+Optical encoder |
| Model | 220HS32-C |
| Excitation mode | 2-2 bipolar |
| Output shaft | Φ4D3.5 |
| Encoder type | Optical encoder |
| Encoder resolution | 500 1000 2000 CPR optional |
| Output torque | 1800~300g.cm |
| Current range | 0.6~0.8A/phase |
| Step angle | 1.8° degree |
Motor outside drawing:
OEM % ODM service:
If there are more specific requirements for other aspects of the product, we can also customize it for customers, and this product can be equipped with a planetary gearbox to reduce the speed and increase the torque, so that the output shaft part can be used in more applications, or it can be According to customer needs, it can be made into various output forms such as trapezoidal screw and worm. We will 100% strive to meet customer requirements for products. If you have any requirements about motors, please contact us.