Changzhou Vic-Tech Motor Technology Co., Ltd.
Focus on quality, customer first, continuous improvement, continuous struggle
Add to Cart
VSM1069 is a special precision micro stepping motor (or linear stepping motor), with a bracket and movable slider (when the motor rotates, the slider will move forward or backward). The moving speed can be controlled by the driving pulse frequency of the precision micro stepping motor, and the moving distance can be controlled by the driving pulse number of the precision micro stepping motor. For this typical motor, when the motor drives the 2-2 phase, one pulse makes the slide move 0.02mm. As shown in the photo, the basic slide is a black plastic (POM) unit, which can also be customized to any shape carrier
10mm diameter motor is widely used in cameras, optical instruments, lenses, precision medical equipment, automatic door locks and other fields due to its small size, high accuracy, easy control and other excellent characteristics.
The motor input part is FPC, but it can be changed to the form of connecting wire, PIN pin, PCB, etc. according to customer requirements.
In addition, the stepper motor can accurately control the speed and number of revolutions, which also determines the moving speed of the slider, and the moving position is accurate and controllable. The position accuracy can be controlled within 0.05mm.
1) Camera Lens
2) Optical instruments
3) Precision medical devices
4) beauty equipment
5)vending machine
Other precise control application
| Model No. | VSM1069 |
| Motor type | Linear stepper motor |
| Phase No. | 2 phases |
| Step angle | 18 degrees |
| Phase resistance | 15 Ohms/phase |
| Excitation method | 2-2 bipolar drive |
| Rated voltage | 3 ~5V DC |
| Lead screw type | M2*0.4Pitch thread |
| Stroke | 26.4 mm |
| Pull-out thrust | Over 3.8 gf at 500 PPS |
| Max response frequency | Over 1100 PPS |
10mm Micro slider Linear Stepping Motor Screw motor with Bracket Stepper Motor
1. In terms of product outer diameter, different sizes such as 6 8 10 15 20 25mm can be selected according to the customer's use environment, space strength, etc.
2. The outlet position of the motor can be freely selected within a 360-degree range, so as to meet the installation requirements in the best state. At the same time, Connector can choose lead wire, PCB, FPC bare pin.
2. According to the requirements of customers, the effective stroke of the motor can be customized within a certain range, mainly considering the diameter and length of the screw,.
usually the maximum length of the M2 screw can be 50mm, the M3 screw can be 100mm, and the M4 screw can be 100mm. Can do 150mm. The use of a lead screw with an excessively large diameter for a small motor consumes a lot of power, so comprehensive consideration should be taken when selecting a motor.
4. The material of the slider is generally made of plastic, which is easy to form and economical.
When the customer has special use environment and requirements, the slider can also be made of metal parts.
Of course, the cost will be relatively high, which is determined according to the customer's requirements for the shape and size of the slider.